製品情報 > Products > motorcycle

AMBOOT Quick-covering motorcycle cover L, 2L, 3L, Moped Class 2 with box

2022Released in July

Click here to see the compatibility chart!

No more messy covering!

Quickly cover your motorcycle after parking!

The ultimate in ease of covering! 4 characteristics

FUNCTION

1.Experience covering your motorcycle in 10 seconds!

Hold the orange handle and back zipper and cover the front of your motorcycle, then pull it on.

Simply pull the cover to the back of the motorcycle to give it a clean fit. There is no need to spread it out again and again!

It can be completed in 10 seconds because there is no wasted motion.

Just pull the cover from the front to the back for smooth coverage!

  • Hook it over the front of the bike
  • When the cover reaches the motorcycle handles, release the cover handle.
  • Pull it to the back!
  • Fasten the zipper!
    Only 10 seconds!
カバーを前方から後方に引っ張ればスーーッとかけられる！

2.Easy to recognize the front and back of the cover.

When the conventional cover was crumpled, it was difficult to tell the difference between the front and back of the cover, and it was necessary to completely spread out the cover and check.

This motorcycle cover has orange handles and zippers that are visible with the silver fabric, and no need to spread out the cover!

It is easy to recognize the front and back of the cover quickly.

3.Made with cotton cloth that does not melt easily even when used immediately after turning off the engine

Won’t melt even if it touches the muffler or exhaust pipe! Won’t stick to them!

Cotton fabric made with heat resistance up to approximately 360°C that does not melt even when touched by an exhaust pipe, which is hotter than a muffler.

Generally, heat-resistant motorcycle covers use cotton fabric only where there is contact with the muffler, but our quick-covering motorcycle cover uses cotton fabric to cover a wide area that may get hot.

A motorcycle cover with a center buckle…
Has to be fastened tightly because it will fly away in the wind.
Upgrade to a drawstring fastener!

Many motorcycle covers have a center buckle to prevent it from flying away in the wind.

But it could melt by touching the engine parts, or the parts of the cover which are not cotton fabric could melt by touching the hot parts of the motorcycle.

Above all, it is very troublesome to attach and detach!

To shorten such time, the function of the drawstring at the bottom was adopted. Once tightened, it no longer needs to be loosened!

【If it is a motorcycle cover with a center buckle…】 It melts if the buckle is fastened immediately after parking.

【If it is only a drawstring at the bottom…】

With previous covers, it was impossible to attach and detach without loosening the string each time.

Loosening the cover every time is annoying… No need to loosen every time with a back zipper

As previous motorcycle covers only had a drawstring function, it was necessary to loosen the cover each time it was attached or detached.
The quick-covering motorcycle cover has a rear zipper so that it can be attached and detached even if the drawstring is tightened.
※Please tie the extra string after the drawstring is tightened.
 

4.Includes a belt to prevent the cover from flying away in the wind and for storage of the cover.

Front and rear locking holes are used to prevent the cover from flying away.

Motorcycle covers are difficult to store!！

There is no place to put the cover
I can’t hang it to dry when it’s wet
It is too big even when folded
But if it is put on the ground, it will get dirty!
If I just leave it on, it will damage the body of the motorcycle
 
Many people have trouble finding a place to store motorcycle covers because they are so large. In an apartment or condominium, there is no place to put the cover except on the balcony of your room or on the ground of the shared bicycle parking lot….But when you put it on the ground, it gets dirty with sand and dust. In addition, when you use the cover next time, the dirt gets on the motorcycle and the cover is worthless!

The handles can be gathered together to save space for storage!！

No more hesitating about where to put it away!！

Thread belt ❸ through belts ❶and ❷ put together.

– – Silver is recommended for outside storage – –

If the yarn is dyed
UV rays hit the yarn directly
Deterioration of the fabric from UV rays happens more quickly
 
If it has a coating
UV rays do not hit the yarn but are reflected
Prevents degradation of the fabric from UV rays!
 

その他にも特徴盛りだくさん

Many more characteristics including
Air vents to prevent stuffiness
Front and rear locking holes for security
Inner diameter 38mm lock holes on the front and rear for security
※Locks are not included.
※Large chains cannot be used.
Processed water-repellent
300D thick fabric

Color

Two-tone gun metallic and silver, easy to distinguish from other covers

Applicable motorcycle types

サイズ①②③④⑤
Lサイズ21812490
3981
2Lサイズ236
1209144101
3Lサイズ265127983886
原付二種
BOX付き		2181239048109
ホンダヤマハスズキカワサキ
LサイズADV 150
CB 125R/250R
CBR 250RR/600RR
Dio 110
Dunk
EM1 e:
GB 350/350S
PCX 125/160
PCX e:HEV
PCX ELECTRIC
VTR250
クロスカブ50/110
ジャイロX
ジャイロキャノピー
ジョルノ
スーパーカブ C125
スーパーカブ50/110
スーパーカブ50プロ/110プロ
ズーマー(余裕あり)
タクト
ダックス125
ナイトホーク250
ハンターカブ125
ベンリィ
ベンリィ プロ
ベンリィe: I
ベンリィe: I プロ
ベンリィe: II
ベンリィe: II プロ
ホーネット250/600
マグナ50(余裕あり)
リード 125		E01
E-Vino
MT-03
MT-07
MT-09
MT-125
MT-25
NMAX125/155
SR400
SRX400
X FORCE
XJR400R
XSR125
XSR700/900
YZF-R125
YZF-R15
アクシスZ
ギア
シグナスX
シグナスグリファス
ジョグ
ジョグ125
ジョグデラックス
ビーノ
マジェスティS		GSX-R125
GSR400/600
GSX250R
GSX400
GSX-S125
ST250
SV650/650X
アヴェニス125
アドレス110
アドレス125
アドレスV50
グラストラッカー
グラディウス400
ジグザー150
ジグザー250
ジグザーSF250
スウィッシュ(余裕あり)
テンプター400
バーグマン200
バーグマンストリート125EX
レッツ
レッツバスケット		Ninja 250/400
Ninja 650
NINJA e-1
Ninja ZX-10RR
Ninja ZX-25R
Ninja ZX-25R SE
Ninja ZX-6R
Z e-1
Z125 PRO
Z250/400
Z650
エストレヤ
バリオス2
2Lサイズ400X
CB 650R/1000R
CB1100EX
CB1100RS
CB1300 SUPER BOLD'OR
CB1300 SUPER FOUR
CB400 SUPER BOLD'OR
CB400 SUPER FOUR
CB750
CBR 1000RR
CBR 400R
CBR 650R
CBR1000RR-R
CL250
CL500
DN-01
HAWK 11
NC750X
NT1100
VFR800F/1200F
VFR800X
VRX Roadster
VT400S/750S
VTR1000F
X11
X4
X-ADV
インテグラ
シルバーウイングGT400/600
フェイズ
フォーサイトEX
フォルツァ
フュージョン
レブル250/500/1100		XMAX
FJR1300A
FJR1300AS
FZ1
MT-10
TMAX(△)
TRACER9 GT
XJR1300
YZF-R1M/YZF-R1
YZF-R25
YZF-R3
YZF-R7
セロー250
マグザム		DR-Z400SM
GSF1200
GSR250/750
GSX1400
GSX-8R
GSX-8S
GSX-R1000R ABS
GSX-S1000/S1000F
GSX-S1000GT
GSX-S1000GX
GSX-S750
Hayabusa
KATANA(1000cc)
Vストローム250
Vストローム650 ABS(△）
Vストローム650/1050(△)
Vストローム650XT ABS(△）
Vストローム800(△）
Vストローム800DE(△）
イナズマ400/1200
スカイウェイブ
バーグマン400
バンディット1200/1250F		MEGURO K3
Ninja 1000SX
Ninja H2 CARBON
NINJA H2 SX
Ninja H2 SX SE
Ninja ZX-10R
VERSYS 1000 SE(△)
VERSYS 650(△)
VERSYS-X 250 TOURER
W800
W800 CAFÉ
W800 STREET
Z H2
Z H2 SE
Z650RS
Z900 RS
Z900 RS CAFÉ
Z900 RS SE
Z900 SE
Z900/1000
ZRX1200 DAEG
3LサイズVT1300CX
シャドウ400
シャドウ750
シャドウスラッシャー		BOLT Rスペック
VMAX1200
VMAX1700
ドラッグスター250/400/1100
ドラッグスタークラッシック400		イントルーダー1400
イントルーダー400
サベージ400
ジェンマ
デスペラード400
ブルバードM109R		ELIMINATOR
ELIMINATOR 250V
ELIMINATOR SE
VULCAN 1500 DRIFTER
VULCAN 900 CLASSIC
VULCAN S
原付二種
BOX付き		ハンターカブ125
クロスカブ50/110
スーパーカブ50/110
スーパーカブ50プロ/110プロ
スーパーカブ C125
PCX 125/160		アクシスZ
シグナスX
シグナスグリファス
NMAX125/155		アドレス110
アドレス125
※原付スクーター/3輪バイク/アドベンチャー/競技用車両は適合外です。
※(△)はのついたバイクは背が高いためカバーをかけた際にスソが浮きます。
※赤文字の車種は実車検証済み

※Moped scooters/three-wheeled bikes/adventure/competition motorcycles are not applicable.

※Motorcycles marked with (△) are taller, so the bottom part of the cover will not reach the ground.

※Cover has been verified as installable on motorcycle names in red.

【Reference】
Example of 2L size installed on the CB1300 and the Rebel 250

Can also be used for Moped Class 2 with a box (QBC-L-BOX) with attached windshield!

【Left】Windshield (screen) is installed on a Super Cub.
【Right】Installed a rear box on a Hunter Cub and covered.

Distributing stores

List of stores

Product Details

Product nameAMBOOT Quick-covering motorcycle cover L, 2L, 3L, Moped Class 2 with box
Part NumberL　QBC-L
2L　QBC-2L
3L　QBC-3L
Moped Class 2 with BOX QBC-L-BOX 　
MaterialPolyester, Acrylic silver coating / Acrylic gunmetal coating
Estimated priceL 7,895 yen (tax included)
2L 8,137 yen (tax included)
3L 8,375 yen (tax included)
Moped Class 2 with BOX 8,256 yen (tax included)
Product Characteristics・Only 10 seconds to cover!
・Easy to recognize the front and back of the cover with the orange handle and back zipper
・Heat resistant cotton material that does not melt with a temperature of about 360°C is used on the inside of the cover. No need to wait for the engine to cool down.
・A drawstring at the bottom, which, once tightened, no longer needs to be loosened.
・Belt included to prevent the cover from flying away in the wind and convenient cover storage → Space-saving cover storage! No dirty covers when storing!
UsesProtecting motorcycles from deterioration caused by ultraviolet rays, antitheft, motorcycle protection, rain protection, dust protection
Colorgun metallic and silver
Included・Main cover
・Belt
Place of productionChina
Caution・Motorcycle covers degrade over time. Deterioration is inevitable.
If you see any tears or cracks in the fabric or parts, please purchase a new one.
・This product is intended to prevent theft, but cannot be expected to do so completely.
・Durability may be impaired by natural phenomena such as ultraviolet rays and acid rain, as well as by usage conditions.
・Do not scratch with pointed objects.
・Do not leave the product under strong sunlight.
The inside of the cover may be hot and affect the motorcycle adversely.
・Do not use near fire. This product is not nonflammable.
・The fabric is treated with a water-repellent finish, but it gradually becomes weaker. Use a commercial water repellent spray if necessary.
・Although the fabric is treated with a water-repellent finish, it is not completely waterproof because it is a sewn product.
Please dry the cover frequently, as leaving the cover in a wet condition may cause discoloration, rainwater intrusion, or other damage to the cover.
・Do not cover a wet or dirty motorcycle as it is. It will cause deterioration of the paint and rusting.
・Please remove large sissy bars (backrests) and antennas before use.
Maintenance and CareTo protect the water-repellent effect of the fabric, please do not use a washing machine or washing by rubbing.
・Dirt can be rinsed off with lukewarm or cold water or by wiping it lightly with a cloth moistened with neutral detergent.
・If dust or dirt is left on the cover for a long time, the water repellent effect will be lost.

関連製品